How Much Oil Goes in a Pressure Washer Pump-Full Guide



Pressure washers are an essential tool like another power tool for maintaining the cleanliness of your home

It’s like any other machine with moving parts, they require regular maintenance, and oil changes to function correctly.

But the question is how much oil goes in a pressure washer pump? and What Kind of Oil Does a Pressure Washer Use

In this comprehensive guide, we’ll go over everything you need to know about checking and changing the oil in your pressure washer pump in 2023

How Much Oil Goes in a Pressure Washer Pump?

The answer to this question may vary depending on the model and make of your pressure washer, so it’s always a good idea to check the user manual for specific information in my experience.

most pressure washer pumps require between 10 and 20 ounces of oil.

keep in mind it’s important not to overfill the pump with too much oil as this can cause damage or even failure of the pump.

To determine exactly how much oil your specific pressure washer pump requires, consult its user manual or contact the manufacturer directly for assistance

For sure, They will be able to provide you with accurate information based on your particular model.

In my view- that proper maintenance and regular checking of your pressure washer’s oil level are crucial components in keeping your machine running smoothly and efficiently.

By following these steps and guidelines carefully

Oil Type and Quantity to Be Used in a Pressure Washer Pump?

First of all-The type and quantity of oil to be used in a pressure washer pump depend on the manufacturer’s recommendations. Always refer to your owner’s manual for detailed instructions specific to your machine.

In most cases, standard 30-weight non-detergent oil is suitable for use in pressure washer pumps in my experience.

But, some manufacturers may recommend alternative types such as synthetic oils or high-temperature oils depending on their design specifications.

When it comes to determining the proper amount of oil required for your pressure washer pump, consult your owner’s manual. It will typically list how much oil should be added based on the specific model and type of engine being used.

In my opinion, overfilling with too much oil is just as bad as underfilling with not enough.

Proper maintenance means striking a perfect balance between these two extremes so that you get optimal performance from your equipment every time you need it!

How to Check If the Pressure Washer Pump Oil Is Ok?

Before using your pressure washer, it is essential to check if the pump oil is in good condition. There are some easy ways to verify this.

Otherwise, you may damage huge to your pressure washer because your old oil will not fight the friction.

1. Check Pump Oil Quality: Color

The first step in checking the quality of your pressure washer pump oil is to observe its color. The oil should be a clear, light brown or yellowish color. If the oil appears dark or black, it may contain contaminants such as dirt and debris that can cause damage to your pump over time.

Dark-colored oil could also indicate that it has been overheated or hasn’t been changed in a while. In contrast, if you notice milky-white fluid, that means water has entered the system which will need draining immediately.

It’s essential to keep an eye on the color of your pressure washer pump oil regularly so you can identify any potential issues before they lead to costly repairs down the line. If you notice anything unusual about its color, change it promptly.

In my opinion, … never rely solely on one factor (color) when determining if there are issues with your pressure washer pump’s performance and always check other variables like thickness and visible particles for good measure!

2. Check Pump Oil Quality: Thickness

When checking the quality of your pressure washer pump oil, thickness is another important factor to consider. The oil should be free-flowing and not too viscous, as thick oil can cause damage to the pump over time.

To check for thickness, you can use a dipstick or simply observe how easily the oil flows out of the container. If it appears too thick or has a gel-like consistency, it may be time for an oil change.

Thick oil can also indicate that contaminants have built up in the pump and are affecting its performance. In this case, it’s best to drain and replace the old oil with fresh lubricant.

As far as I understand, using high-quality pump oil designed specifically for pressure washers will help ensure optimal performance and longevity of your equipment. Don’t ignore signs of thick or dirty pump oil – regular maintenance will save you from costly repairs later on.

3. Check pump oil quality: Visible particles

When checking the quality of oil in a pressure washer pump, it’s important to keep an eye out for visible particles. These can include dirt, debris or metal shavings that have found their way into the oil tank. If left unchecked, these particles can cause damage to your pump and reduce its lifespan.

To check for particles in your pump oil, first turn off the engine and let it cool down. Then remove the oil cap and take a look at the level of oil in the tank. If you see any dark spots or small objects floating on top of the oil, this is likely a sign that there are contaminants present.

To help prevent particles from getting into your pump’s oil tank in future, make sure to always replace air filters regularly and avoid using dirty water sources when power washing.

By keeping an eye out for visible particles in your pressure washer’s pump oil, you’ll be able to catch potential issues early on before they turn into bigger problems down the line.

How to Check the Pump Oil Level?

Firstly, locate the oil cap on top of the pump and carefully unscrew it. Wipe off any dirt or debris around the opening before checking for oil inside using a dipstick or sight glass.

If there is no visible sign of oil, add sufficient amounts until it reaches halfway up the sight glass or covers half of the dipstick markings. Overfilling can lead to damage, so be cautious not to exceed this level. right?

It’s important to note that some models may have different monitoring methods like an electronic gauge or an indicator light. Therefore, always refer to your user manual for instructions specific to your pressure washer model.

By regularly checking your pump’s oil levels, you can avoid costly damages caused by inadequate lubrication while improving its overall longevity and efficiency, It seems to me that.

What to do if you do not know how much pump oil is needed?

If you are unsure about how much pump oil is needed for your pressure washer, don’t worry! There are a few ways to find out. Firstly, check the owner’s manual or manufacturer’s website for specific instructions on oil type and quantity. If that doesn’t work, try contacting customer support for assistance.

Another option is to use the dipstick method. This involves removing the fill cap and wiping off the dipstick before inserting it into the oil tank. Once you pull it out again, check the level of oil on it against the markings on the stick.

It is obvious that … you can also estimate how much oil your pump needs by measuring its capacity or checking with other users who have similar models. However, keep in mind that using too little or too much oil can damage your pressure washer pump and affect its performance.

It’s important to note that different brands and models may require different amounts of pump oil, so be sure to double-check before adding any extra or starting up your machine without enough lubrication That is why I think …

What Type of Oil Should Be Used in a Pressure Washer Pump?

It is clear that … to note that regular motor oil should not be used in a pressure washer pump as it may cause damage and reduce performance. Instead, high-quality synthetic or mineral-based pump oil should be used.

The viscosity or thickness of the oil also plays an important role in determining its suitability for use in a pressure washer pump. It is best to refer to the manual provided with your equipment for specific recommendations on viscosity levels.

Some popular brands that offer suitable oils include Briggs & Stratton, Generac and Simpson. These oils are specially formulated to provide maximum protection against wear and tear, rust, corrosion, and heat buildup.

Using the correct type and grade of oil will not only extend the life of your pressure washer but also improve its overall performance. So always check with your manufacturer’s recommendation before selecting an appropriate oil for your machine!

How to Change the Oil in the Pressure Washer Pump?

Changing the oil in a pressure washer pump is an important maintenance task that should be performed periodically to extend the life of your equipment. Here’s how you can do it:

By following these simple steps regularly, you’ll keep your pressure washer running smoothly and efficiently for years to come without experiencing any major problems!

1: Remove the Contaminants from the Pump

Before you can change the oil in your pressure washer pump, it is important to first remove any contaminants from the pump. This will ensure that your new oil remains clean and effective.

To start, turn off the pressure washer engine and let it cool down completely. Once cooled, disconnect the hoses and spray gun from the machine.

Next, use a brush or rag to wipe away any visible dirt or debris on the outside of the pump. Then, carefully remove both plugs located on either side of the pump using a wrench or pliers.

Be sure to catch any old oil that may spill out during this step with an appropriate container. Inspect for any metal shavings or other particles that could indicate damage within the pump.

Once all contaminants have been removed from inside the pump, move onto draining out all remaining old oil before refilling with fresh lubricant as per manufacturer’s instructions.

By following these simple steps to properly maintain your pressure washer’s pump by removing contaminants prior to changing its oil you’ll ensure optimal performance every time!

2: Drain the Old Oil

The second step in changing the oil in a pressure washer pump is to drain the old oil. This is an important step because it allows you to remove any contaminants that may have accumulated in the oil over time.

To begin, locate the drain plug on your pump. It’s usually located at the bottom of the crankcase and can be removed with a wrench or pliers.

Before removing the plug, make sure you have a container ready to catch all of the used oil. Once you’ve placed your container underneath, remove the plug and allow all of the old oil to drain out completely.

It’s important to let all of it drain out so that your new oil won’t mix with any leftover debris or contaminants from before. You’ll know when it’s finished draining when no more drops come out.

Once all of your old oil has been drained, replace and tighten up your drain plug securely while being careful not to overtighten it as this could damage threads on both threads or surfaces involved

3: Refill the Oil Tank

Once you have drained the old oil from your pressure washer pump, it’s time to refill the oil tank. Before doing so, make sure to check the owner’s manual for the recommended type and amount of oil needed.

To begin refilling the oil tank, locate the fill cap on top of the pump and remove it. Using a funnel, slowly pour in small amounts of oil at a time until it reaches just below the threads of the fill hole.

Be careful not to overfill as this can cause excess pressure in your pump and potentially damage it. It is always better to err on the side of caution and add less than too much.

After filling with oil, replace and tighten down the fill cap securely. Wipe away any excess spills or drips around the area before starting up your pressure washer again.

Remember that proper maintenance such as regularly checking and refilling your pressure washer pump with fresh oil will help prolong its lifespan and ensure optimal performance.


I’m assuming that, my ride will help you in every corner of how much oil goes in a pressure washer pump, you will ensure that your machine runs smoothly for years to come!


Can you put too much pump oil in a pressure washer?

Never overfill your pressure washer pump with oil to ensure optimal performance and prolong its lifespan.

Is there supposed to be oil in a pressure washer pump?

Without oil, these moving parts can become damaged and wear out much faster.

How much oil does a Honda pressure washer pump hold?

As for Honda pressure washers, most models require about 12-13 ounces of pump oil.


  • Lucas

    Hi I am, a passionate and self-sufficient ‘USA’ resident who never depends on others to clean cars, other vehicles, decks, patios, driveways, sidewalks, and the exterior of my house. When I’m not busy always love to research new techniques to improve my cleaning skills and spend time maintaining pressure washers to keep them in top condition.

    View all posts