Clogged? Clean Gutters with a Pressure Washer Like a Pro!

Clogged gutters can lead to serious problems such as water damage, mold growth, and even foundation issues. And if you’re like most homeowners, cleaning your gutters is probably not at the top of your to-do list.

But fear not! With a pressure washer in hand, you can easily and efficiently clean your gutters without risking life and limb climbing up a ladder.

In this full guide, on how to clean gutters with a pressure washer, we’ll cover everything from the best tools to use to step-by-step instructions on how to get the job done quickly and safely.

So grab your pressure washer and let’s get started!

Before Start Cleaning

Cleaning gutters is an essential task that every homeowner should do to prevent water damage and maintain the integrity of their home. Here are some steps on how to clean your gutters using a pressure washer effectively.

By following these simple steps on how to clean gutters with a pressure washer, you’ll keep them free-flowing all year round!

1. Use the right ladder

Using the right ladder is crucial when it comes to cleaning gutters with a pressure washer. Choosing the wrong ladder can lead to accidents and injuries, so it’s important to take your time in selecting one that will work for you.

Firstly, make sure that your ladder is tall enough to reach your gutters without having to stretch or lean over too far. This will help you maintain balance and prevent falls.

Next, ensure that the ladder has slip-resistant feet or pads at the bottom. These will provide stability on uneven surfaces such as grass or gravel.

It’s also essential to choose a sturdy and reliable ladder made of high-quality materials such as aluminum or fiberglass. Avoid using wooden ladders which may be prone to rotting and breaking under weight.

Always set up your ladder on level ground and have someone hold it steady while you climb up. Alternatively, invest in a stabilizer bar attachment for added safety and support.

2. Remove debris by hand

Removing debris by hand is an essential part of cleaning gutters. Before using a pressure washer, it’s crucial to remove any large debris that could clog your gutter or damage the machine. You’ll need proper gloves and a bucket for this task.

Start at the downspout and work your way along the gutter, collecting debris in your bucket as you go. Be sure to inspect each section thoroughly before moving on to ensure no blockages remain.

While removing debris by hand can be time-consuming, it’s also an opportunity to visually inspect your gutters for any signs of damage or wear and tear. Look out for rust spots, cracks or areas where water isn’t flowing correctly.

It’s important not to rush this process as it sets the foundation for a thorough clean with a pressure washer later on. Once you’ve removed all visible debris from your gutters, move on to using a cleaning attachment with your pressure washer.

Removing debris by hand may seem like hard work but taking the time to do so will save you headaches in the long run.

3. Use a gutter-cleaning tools

First and foremost, you’ll need a pressure washer that has enough power to blast away any debris in your gutters. A gas-powered pressure washer is typically more powerful than an electric one and can handle tougher jobs.Check our comprising of industry popular brand Ryobi Vs Greenworks

Next, a telescoping wand extension will help you reach higher areas without having to climb up on a ladder. This attachment allows you to adjust the length of your wand for maximum reach.

A gutter cleaning attachment is another essential tool that attaches to the end of your wand and helps funnel water directly into your gutters while removing any debris that may be clogging them.

Don’t forget about safety gear such as gloves, eye protection, and non-slip shoes or boots. These will keep you safe from any flying debris or slips on wet surfaces while cleaning your gutters.

How to Clean Gutters Step By Step

Cleaning your gutters with a pressure washer is an effective way to remove debris and keep them in good condition. However, it’s important to use the right technique when doing so.

Firstly step inspection- always start by inspecting your gutters for damage or leaks. If you find any issues, fix them before proceeding with cleaning.

Second step check pressure- ensure that the water pressure of the washer is not too high as it can cause damage to your gutters or roof.

Third step pattern- When using a pressure washer to clean your gutters, work from top to bottom and move slowly along the length of each section. Be sure to wear protective gear like gloves and goggles as there will be a lot of debris flying around.

Fourth step aim- It’s also essential that you don’t aim directly at shingles or roofing material while washing as this could lead to water intrusion and costly repairs down the line.



Cleaning your gutters with a pressure washer can be an efficient method if done correctly. Just make sure you’re taking necessary precautions and working safely!

Why Do Rain Gutters Matter?

One inch of rain on a 1,000 square foot roof produces about 620 gallons of water, comparison, an average bathtub holds around 60 to 80 gallons, imagine the destruction all that water can cause to your home

https://www.mrhandyman.com/

Should I Use Detergent to Pressure Wash My Gutters?


Those who advocate for using detergent often claim that it helps break down stubborn debris and makes the cleaning process more effective overall. However, it’s important to keep in mind that certain types of detergent can be harmful to your gutter materials or nearby plants.

If you do decide to use detergent, make sure you choose one that is safe for both your gutters and the environment. Additionally, be sure to follow any instructions provided on the package regarding dilution ratios and application methods.

Ultimately, whether or not you choose to use detergent when pressure washing your gutters will depend on personal preference and specific circumstances. If you’re unsure about what approach is best for you, consider consulting a professional or doing further research before proceeding.

FAQ

is it ok to pressure wash soffits and fascia?

Yes, it is generally safe to pressure wash soffits and fascia as long as you use proper techniques and precautions to avoid any damage.

What pressure washer nozzle for gutters?

Use a nozzle with a 15-25-degree spray angle. This angle provides a balance between the cleaning power and the potential for damage. A nozzle with a narrower spray angle can be too concentrated and might cause damage to the gutters, while a wider angle may not provide enough cleaning power.

What Psi Should You Use While Gutters Cleaning?

it’s recommended to use a PSI (pounds per square inch) between 1,200 and 2,000.

Author

    by
  • Lucas

    Hi I am, a passionate and self-sufficient ‘USA’ resident who never depends on others to clean cars, other vehicles, decks, patios, driveways, sidewalks, and the exterior of my house. When I’m not busy always love to research new techniques to improve my cleaning skills and spend time maintaining pressure washers to keep them in top condition.

    View all posts